One of the most recognizable visual enhancements to the updated 3 series coupe was the upgraded LED tail lamps. These tail lamps are now available to update the look of older models. Product highlights and benefits include: Striking visual enhancement. Updated, modern appearance. Improved lighting with the use of LED technology. Lower energy consumption. Longer bulb service life. Ease of installation.
For 3 Series vehicles produced from 3/2007 – 9/2009, the Footwell Module must be replacedfor proper functionality. If the FRM has previously been replaced with an FRM3, it does not need to bereplaced. Similar aftermarket solutions may not function properly as the vehicles would not be coded to becompatible with the lower power requirement of LED’s. This could lead to “Bulb Check” warning lights,and flickering of the tail lamps on startup. Recommended installation time: 35 minutes including coding (without FRM replacement),75minutes including coding (with FRM replacement).
Other Name: REAR LIGHT IN THE SIDE PANEL; Tail Lamp
Fits the following BMW Models
2009-2010 BMW 335i xDrive Coupe(E92)
One of the most recognizable visual enhancements to the updated 3 series coupe was the upgraded LED tail lamps. These tail lamps are now available to update the look of older models. Product highlights and benefits include: Striking visual enhancement. Updated, modern appearance. Improved lighting with the use of LED technology. Lower energy consumption. Longer bulb service life. Ease of installation.
For 3 Series vehicles produced from 3/2007 – 9/2009, the Footwell Module must be replacedfor proper functionality. If the FRM has previously been replaced with an FRM3, it does not need to bereplaced. Similar aftermarket solutions may not function properly as the vehicles would not be coded to becompatible with the lower power requirement of LED’s. This could lead to “Bulb Check” warning lights,and flickering of the tail lamps on startup. Recommended installation time: 35 minutes including coding (without FRM replacement),75minutes including coding (with FRM replacement).
Other Name: REAR LIGHT IN THE SIDE PANEL; Tail Lamp
Fits the following BMW Models
2009-2010 BMW 335i xDrive Coupe(E92)
One of the most recognizable visual enhancements to the updated 3 series coupe was the upgraded LED tail lamps. These tail lamps are now available to update the look of older models. Product highlights and benefits include: Striking visual enhancement. Updated, modern appearance. Improved lighting with the use of LED technology. Lower energy consumption. Longer bulb service life. Ease of installation.
For 3 Series vehicles produced from 3/2007 – 9/2009, the Footwell Module must be replacedfor proper functionality. If the FRM has previously been replaced with an FRM3, it does not need to bereplaced. Similar aftermarket solutions may not function properly as the vehicles would not be coded to becompatible with the lower power requirement of LED’s. This could lead to “Bulb Check” warning lights,and flickering of the tail lamps on startup. Recommended installation time: 35 minutes including coding (without FRM replacement),75minutes including coding (with FRM replacement).
Other Name: REAR LIGHT IN TRUNK LID, LEFT; Tail Lamp
Fits the following BMW Models
2009-2010 BMW 335i xDrive Coupe(E92)
One of the most recognizable visual enhancements to the updated 3 series coupe was the upgraded LED tail lamps. These tail lamps are now available to update the look of older models. Product highlights and benefits include: Striking visual enhancement. Updated, modern appearance. Improved lighting with the use of LED technology. Lower energy consumption. Longer bulb service life. Ease of installation.
For 3 Series vehicles produced from 3/2007 – 9/2009, the Footwell Module must be replacedfor proper functionality. If the FRM has previously been replaced with an FRM3, it does not need to bereplaced. Similar aftermarket solutions may not function properly as the vehicles would not be coded to becompatible with the lower power requirement of LED’s. This could lead to “Bulb Check” warning lights,and flickering of the tail lamps on startup. Recommended installation time: 35 minutes including coding (without FRM replacement),75minutes including coding (with FRM replacement).
Other Name: REAR LIGHT IN TRUNK LID, RIGHT; Tail Lamp
Fits the following BMW Models
2009-2010 BMW 335i xDrive Coupe(E92)
One of the most recognizable visual enhancements to the updated 3 series coupe was the upgraded LED tail lamps. These tail lamps are now available to update the look of older models. Product highlights and benefits include: Striking visual enhancement. Updated, modern appearance. Improved lighting with the use of LED technology. Lower energy consumption. Longer bulb service life. Ease of installation.
For 3 Series vehicles produced from 3/2007 – 9/2009, the Footwell Module must be replacedfor proper functionality. If the FRM has previously been replaced with an FRM3, it does not need to bereplaced. Similar aftermarket solutions may not function properly as the vehicles would not be coded to becompatible with the lower power requirement of LED’s. This could lead to “Bulb Check” warning lights,and flickering of the tail lamps on startup. Recommended installation time: 35 minutes including coding (without FRM replacement),75minutes including coding (with FRM replacement).
BMW LED Door Projectors make entering your vehicle an experience all on its own, via a projected image displayed on the ground beneath the front doors. Direct replacement for the existing puddle lights. For even more customization, the image is interchangeable by inserting different slides into the projector. M logo, BMW Roundel, BMW wordmark, and xDrive logo included.