How to replace front brake pads on BMW 325i?

Apply the parking brake, then loosen the front wheel bolts. Raise the front of the vehicle and support it securely on jackstands. Remove both front wheels. For Teves and ATE (floating) calipers, during pad replacement, remove any adhesive foil on new pads, clean the caliper guide surfaces, apply high-temperature brake assembly grease, and monitor fluid level in the reservoir when pushing the caliper piston back. The manufacturer recommends replacing the brake pad wear sensor if removed. When reinstalling the caliper, tighten the mounting bolts. Before installing the wheels, clean the mating surfaces of the hub and wheel and apply an anti-seize compound. For Brembo (fixed) calipers, disconnect the brake pad sensor harness connector and detach the harness. Remove the brake pad sensor. To replace pads, drive out the top retaining pin, remove the bottom pad pin, and cross-spring. Using needle-nose pliers, remove the inboard brake pad. If special tool #34 1 050 is available, remove both pads; otherwise, remove one. Push the caliper pistons into the bores, ensuring the master cylinder reservoir doesn't overflow. Depress both pistons simultaneously if needed. BMW specifies using brake pad paste. Position the new brake pads into the caliper, install the wear sensor, and depress the brake pedal several times. Repeat the procedure for the remaining caliper. For all models, install the wheels, lower the vehicle, tighten wheel bolts, depress the brake pedal to seat the pads, check brake fluid level, turn the ignition key to the accessory position for 30 seconds, and check the brakes' operation before normal use.

Genuine BMW 325i Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Pads found

View related parts
BMW 325i Front Brake Pad Set
Part Number: 34116761244
$73.44 MSRP: $113.52
You Save: $40.08 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Front Pad
- Position: Front
- Replaces: 34-11-6-752-482, 34-11-6-761-242
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Disc Brake Pad Repair Kit
Part Number: 34216790761
$81.85 MSRP: $126.52
You Save: $44.67 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Rear Pad
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Disc Brake Pad Repair Kit
Part Number: 34216778168
$68.92 MSRP: $106.54
You Save: $37.62 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Rear Pad
- Replaces: 34-21-1-164-501, 34-21-6-761-239, 34-21-6-761-241, 34-21-1-161-455, 34-21-1-165-235
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Disc Brake Pad Repair Kit
Part Number: 34216774692
$81.85 MSRP: $126.52
You Save: $44.67 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Rear Pad
- Replaces: 34-21-6-767-148, 34-21-6-773-161, 34-21-6-767-150
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Front Brake Pad Set
Part Number: 34116771868
$112.52 MSRP: $173.93
You Save: $61.41 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Front Pad
- Position: Front
- Replaces: 34-11-6-769-099, 34-11-6-799-166
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Disc Brake Pad Repair Kit
Part Number: 34116786044
$147.17 MSRP: $231.35
You Save: $84.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Front Pad
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Disc Brake Pad Set
Part Number: 34216761240
$76.59 MSRP: $118.39
You Save: $41.80 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Brake Pad, Rear Pad
- Replaces: 34-21-6-790-071
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Wagon M54 Engine(E46), Wagon(E46)
View related parts
BMW 325i Rear Brake Pads Set
Part Number: 34216761239
$68.92 MSRP: $106.54
You Save: $37.62 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free
- Position: Rear
- Replaced by: 34216778168
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Front Brake Pad Set
Part Number: 34116761242
$73.44 MSRP: $113.52
You Save: $40.08 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free
- Position: Front
- Replaced by: 34116761244
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Rear Brake Pad Set
Part Number: 34211158912
$89.06 MSRP: $126.00
You Save: $36.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Rear Pad
- Position: Rear
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Brake Pad Set Front
Part Number: 34111162481
Product Specifications
- Other Name: Repair Kit, Brake Pads Asbestos-Free; Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)

BMW 325i Brake Pads

If you are looking for OEM BMW 325i Brake Pads, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Brake Pads that come backed by the manufacturer's warranty.

BMW 325i Brake Pads Parts Questions & Experts Answers

Disc Brake Pad Repair Kit
34216790761
Q: How to replace front brake pads on BMW 325i?
A: Apply the parking brake, then loosen the front wheel bolts. Raise the front of the vehicle and support it securely on jackstands. Remove both front wheels. For Teves and ATE (floating) calipers, during pad replacement, remove any adhesive foil on new pads, clean the caliper guide surfaces, apply high-temperature brake assembly grease, and monitor fluid level in the reservoir when pushing the caliper piston back. The manufacturer recommends replacing the brake pad wear sensor if removed. When reinstalling the caliper, tighten the mounting bolts. Before installing the wheels, clean the mating surfaces of the hub and wheel and apply an anti-seize compound. For Brembo (fixed) calipers, disconnect the brake pad sensor harness connector and detach the harness. Remove the brake pad sensor. To replace pads, drive out the top retaining pin, remove the bottom pad pin, and cross-spring. Using needle-nose pliers, remove the inboard brake pad. If special tool #34 1 050 is available, remove both pads; otherwise, remove one. Push the caliper pistons into the bores, ensuring the master cylinder reservoir doesn't overflow. Depress both pistons simultaneously if needed. BMW specifies using brake pad paste. Position the new brake pads into the caliper, install the wear sensor, and depress the brake pedal several times. Repeat the procedure for the remaining caliper. For all models, install the wheels, lower the vehicle, tighten wheel bolts, depress the brake pedal to seat the pads, check brake fluid level, turn the ignition key to the accessory position for 30 seconds, and check the brakes' operation before normal use.

Related BMW 325i Parts

Browse by Year

2006 Brake Pads 2005 Brake Pads 2004 Brake Pads 2003 Brake Pads 2002 Brake Pads 2001 Brake Pads 1995 Brake Pads 1994 Brake Pads 1993 Brake Pads 1992 Brake Pads 1991 Brake Pads 1990 Brake Pads 1989 Brake Pads 1988 Brake Pads 1987 Brake Pads