How to remove and install the steering column switch module and steering wheel on BMW 325i?

Place the steering column in the fully lowered and extended position. Remove the steering wheel. Note that as the steering wheel is removed, the clockspring is automatically locked to prevent any accidental rotation. Unclip the upper and lower steering column covers. If required, squeeze together the clips and detach the upper shroud from the boot. Remove the mounting bolts and slide the module up the steering column. Disconnect the various electrical connectors from the module as it is withdrawn. The steering column switch module has very few mechanical elements, as the operating components are optical switches. The module also incorporates the steering angle sensor. Handle the module with great care. If required, release the clips and separate the clockspring. No further disassembly of the module is recommended. Installation is the reverse of removal, ensuring that the wiring is correctly routed. If a new module has been installed, it must be coded/calibrated using BMW diagnostic equipment. Entrust this task to a dealer or other qualified shop. Two different types of steering wheels are used on the 3-Series range; either a Multifunction steering wheel or a Sports steering wheel. Remove the driver's airbag. For the Multifunction Steering Wheel, disconnect the switch electrical connector from the center of the steering wheel. The switches are wired together. Carefully pry the switches from the steering wheel. Note that the horn switch is integral with the airbag unit. Installation is the reverse of removal. For the Sports Steering Wheel, remove the retaining bolts on the front face of the steering wheel, and unclip the switch carrier panel from the steering wheel. Disconnect the electrical connector as the panel is withdrawn. If required, remove the bolts and detach the switches from the panel. Installation is the reverse of removal.

Genuine BMW 325i Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Turn Signal Switches found

View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61318363662
$112.26 MSRP: $141.98
You Save: $29.72 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311393288
$233.40 MSRP: $291.37
You Save: $57.97 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Turn Signal Switch
- Replaces: 61-31-1-393-297
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Steering Column Switch
Part Number: 61318379091
$300.97 MSRP: $390.42
You Save: $89.45 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column
- Replaces: 61-12-8-376-443
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311375190
$359.58 MSRP: $452.74
You Save: $93.16 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Steering Column Switch
Part Number: 61319123049
$697.32 MSRP: $912.39
You Save: $215.07 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column; Multifunction Switch
- Replaces: 61-31-6-989-580, 61-31-6-965-290, 61-31-9-121-901, 61-31-9-110-887
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Turn Signal Cruise Control Wiper Switch Assembly
Part Number: 61319123048
$697.32 MSRP: $912.39
You Save: $215.07 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column; Combination Switch, Multifunction Switch
- Replaces: 61-31-6-989-576, 61-31-9-110-883, 61-31-6-962-672, 61-31-9-121-900, 61-31-6-965-286
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Steering Column Switch
Part Number: 61319123032
$606.36 MSRP: $793.38
You Save: $187.02 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column; Combination Switch, Multifunction Switch
- Replaces: 61-31-9-121-745, 61-31-6-962-670, 61-31-6-989-574, 61-31-9-110-881, 61-31-6-965-278
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61318363668
$112.26 MSRP: $141.98
You Save: $29.72 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61318360913
$150.96 MSRP: $210.08
You Save: $59.12 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Steering Column Switch
Part Number: 61319169071
$606.36 MSRP: $793.38
You Save: $187.02 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column; Combination Switch, Multifunction Switch
- Replaces: 61-31-9-123-033, 61-31-6-962-674, 61-31-6-989-578, 61-31-9-110-885, 61-31-9-121-746, 61-31-6-965-288
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Steering Column-Combo Switch
Part Number: 61319123056
$697.32 MSRP: $912.39
You Save: $215.07 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column; Combination Switch, Multifunction Switch
- Replaces: 61-31-6-965-287, 61-31-6-962-673, 61-31-9-110-884, 61-31-6-989-577, 61-31-9-121-908
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Multifunction Switch
Part Number: 61319203109
$697.32 MSRP: $912.39
You Save: $215.07 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Cluster Steering Column; Combination Switch
- Replaces: 61-31-6-962-677, 61-31-9-110-888, 61-31-6-989-581, 61-31-9-121-909, 61-31-6-965-291, 61-31-9-123-057
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61318360905
$154.49 MSRP: $192.87
You Save: $38.38 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311377077
$186.55 MSRP: $232.88
You Save: $46.33 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311393297
$233.40 MSRP: $291.37
You Save: $57.97 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control
- Replaced by: 61311393288
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311373025
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311377966
$134.43 MSRP: $167.82
You Save: $33.39 (20%)
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61318360911
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311393286
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch, Turn Signal Switch
- Replaces: 61-31-1-393-296
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Dip-Dim Control Turn Signal Switch
Part Number: 61311393296
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control
- Replaced by: 61311393286
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)

BMW 325i Turn Signal Switch

If you are looking for OEM BMW 325i Turn Signal Switch, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Turn Signal Switch that come backed by the manufacturer's warranty.

BMW 325i Turn Signal Switch Parts Questions & Experts Answers

Turn Signal Cruise Control Wiper Switch Assembly
61319123048
Q: How to remove and install the steering column switch module and steering wheel on BMW 325i?
A: Place the steering column in the fully lowered and extended position. Remove the steering wheel. Note that as the steering wheel is removed, the clockspring is automatically locked to prevent any accidental rotation. Unclip the upper and lower steering column covers. If required, squeeze together the clips and detach the upper shroud from the boot. Remove the mounting bolts and slide the module up the steering column. Disconnect the various electrical connectors from the module as it is withdrawn. The steering column switch module has very few mechanical elements, as the operating components are optical switches. The module also incorporates the steering angle sensor. Handle the module with great care. If required, release the clips and separate the clockspring. No further disassembly of the module is recommended. Installation is the reverse of removal, ensuring that the wiring is correctly routed. If a new module has been installed, it must be coded/calibrated using BMW diagnostic equipment. Entrust this task to a dealer or other qualified shop. Two different types of steering wheels are used on the 3-Series range; either a Multifunction steering wheel or a Sports steering wheel. Remove the driver's airbag. For the Multifunction Steering Wheel, disconnect the switch electrical connector from the center of the steering wheel. The switches are wired together. Carefully pry the switches from the steering wheel. Note that the horn switch is integral with the airbag unit. Installation is the reverse of removal. For the Sports Steering Wheel, remove the retaining bolts on the front face of the steering wheel, and unclip the switch carrier panel from the steering wheel. Disconnect the electrical connector as the panel is withdrawn. If required, remove the bolts and detach the switches from the panel. Installation is the reverse of removal.