Contact Us Live Chat or 1-888-580-1680
My Garage
My Account
Cart

Genuine BMW Z3 Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Series
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

  • BMW Z3 Power Steering Pump - 32411092604
    Diagram for BMW Z3 Power Steering Pump - 32411092604
    View related parts
    Product Specifications
    • Other Name: Power Steering Pump
    • Replaces: 32-41-1-092-603
    • Warranty: This genuine part is guaranteed by BMW's factory warranty.
    Fits the following Vehicles:
    • 1996-1998 BMW Z3 | 1.9L Engine(E36), Roadster 1.9L(E36), Roadster(E36)
  • BMW Z3 Power Steering Pump - 32411093039
    Diagram for BMW Z3 Power Steering Pump - 32411093039
    View related parts
    Product Specifications
    • Other Name: Power Steering Pump
    • Warranty: This genuine part is guaranteed by BMW's factory warranty.
    Fits the following Vehicles:
    • 1997-2002 BMW Z3 | 2.8L Engine(E36), Coupe(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36)

BMW Z3 Power Steering Pump

If you are looking for OEM BMW Z3 Power Steering Pump, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW Z3 Power Steering Pump that come backed by the manufacturer's warranty.

BMW Z3 Power Steering Pump Parts Questions & Experts Answers

  • Q: How do you remove and install a power steering pump on BMW Z3?
    A: To remove and install the power steering pump, start by disconnecting the negative battery cable and releasing the pressure from the reservoir. Remove the power steering belt and place a drain pan under the reservoir and pump. Siphon the hydraulic fluid from the reservoir and disconnect and plug the hydraulic lines. Remove the bolts and loosen the nuts to turn the adjusting pinion, then remove the drive belt. Remove the bolts from the brackets holding the pump and remove the pump assembly. To install, follow the reverse order of removal and tighten the adjusting pinion if equipped. If the vehicle has a tandem pump, the removal and installation procedure is the same. After installation, bleed the power steering system by applying the parking brake and blocking the rear wheels. Locate the reservoir in the left front area of the engine compartment and fill it up to the upper level mark with the recommended fluid. Start the engine and check the fluid level, topping up as necessary. Turn the steering full lock left and right, rechecking the fluid level and topping up as necessary. Repeat this process at least two times in succession and reinstall the reservoir cap.

Related BMW Z3 Parts