BMW 34116773132 Disc Brake Caliper

You can Select Your Vehicle to check if 34116773132 fits your vehicle.

Remove the plenum cover to access the brake fluid reservoir and top off the reservoir. Connect a pressure bleeder to the reservoir and pressurize the system to approximately 2 bar (29 psi), ensuring not to exceed this pressure to avoid damaging the brake fluid reservoir. Connect the bleeder hose and bottle to the right rear caliper bleeder screw, and have a helper hold the brake pedal down. Open the bleeder screw and have the helper slowly pump the brakes about 10 times with the bleeder screw open, holding the pedal down on the last pump. Once the escaping fluid is free of air bubbles, close the bleeder screw. Ensure the bleeder hose remains submerged in clean brake fluid whenever the bleeder valve is open. After closing the bleeder screw, release the brake pedal, refill the brake fluid reservoir, and proceed to the left rear wheel. Continue bleeding the remaining wheels in the following order: left rear, right front, and left front.

Lift off the caliper and spin the assembly off the hose, then plug the open fluid lines and ports.