BMW 31316796156 Front Right Shock Absorber Strut

You can Select Your Vehicle to check if 31316796156 fits your vehicle.

The coil spring should be positioned between the spring holders in a spring compressor, ensuring that three coils lie between them before compressing the spring.

The steering and suspension check includes inspecting tires for irregular wear patterns and proper inflation, checking the universal joint and steering gear housing for leakage, examining tie-rod ends and all suspension and steering components for damage or wear, testing the movement of the steering components while an assistant turns the steering wheel, checking balljoints for play and inspecting their boots for damage, and inspecting the suspension arm bushings at the rear of the vehicle for deterioration.

Yes, most strut assembly components can be replaced.

Attach the shock absorber upper mount to the subframe using new self-locking nuts, and avoid mixing shock brands on a single axle by using the BMW part number to match manufacturers.

Trace the wiring to disconnect both the ABS wheel speed sensor and brake pad wear sensor. Unclip the wiring and, if applicable, detach the ride height sensor rod from the control arm.

Slide the tube, bump stop, and cap onto the shock absorber. For installation, follow the reverse steps of removal, ensuring proper torque settings and alignment are maintained.

Mark the position of the strut top bearing studs on the strut tower to maintain the original camber.