BMW 25167514885 Gear Shift

You can Select Your Vehicle to check if 25167514885 fits your vehicle.

To remove the Automatic Transmission Shift Levers assembly, first raise the vehicle and support it securely on jackstands, ensuring the Automatic Transmission Shift Levers is in position P. Loosen the selector cable clamping nut on the transmission lever from underneath the vehicle, then unscrew the locknut securing the selector outer cable and remove it from the support bracket on the transmission. In the passenger cabin, pull the knob from the Automatic Transmission Shift Levers with a strong tug, avoiding any twisting to prevent damage to the turning lock. Carefully pry up the lever trim with the lever boot from the center console and disconnect the wiring connectors from the underside of the trim, noting their installed locations. Remove the two trim retaining screws at the rear of the Automatic Transmission Shift Levers opening, lift the trim, and disconnect the wiring connectors from the underside. Pull out the storage tray from above the ashtray, then remove the four retaining screws and pull the ashtray/switch frame back from the center console, pressing the switches out of the frame and disconnecting their wiring connectors while noting their positions. Loosen the interlock cable clamping screw and disconnect any wiring connectors attached to the Automatic Transmission Shift Levers assembly, then remove the three screws securing the lever assembly to the floor and maneuver the assembly up from its location, unhooking the interlock cable as it is withdrawn. For installation, reverse the removal process while adjusting the interlock cable, pushing the boot down the lever until the locking groove is exposed before installing the gear knob, and adjusting the selector cable upon completion.