BMW 32413404615 Power Steering Pump

You can Select Your Vehicle to check if 32413404615 fits your vehicle.

Replace the current power steering fluid by using a clean syringe to siphon the contents of the fluid reservoir, this fluid should not be reused. Lift up the bonnet of the vehicle and take off the intake filter housing. If reusing the belt then remove the accessory belt from the power steering pump and mark the direction of its rotation. And in front of it, before it bolted into place, the power steering pulley comes off with the fastenings. In the engine compartment, you need to unscrew the hose clamp, disconnect the hose for fluid intake from the pump, while ready to cover any dripping fluid. Thoroughly seal the holes in the pump and the hose end in order to avoid accumulation of any contaminants. On the driver's side of the engine block, pull out the following: the pump mounting bolts, the splash shield from under the engine. Undo the pressure fitting and pressure line then unlatch the pump and take out the bolts used in mounting the pump, always remember to take note of spacers or shims used and then pull out the pump from the engine bay. On the installation it should be a regime that all thread bore, bolts, nuts, fluid couplings and mating surfaces must be clean. When connecting the power steering hose again one should use new sealing rings and the hoses should be positioned don't interfere with the chassis exceptionally thinly. Use new aluminum fasteners and install the pump according to the torque sequence: to tighten all the fasteners of the power steering pump to 2 Nm (18 in-lb), and the bolts on the front side of the power steering pump to the engine block according to the torque specification as well as the angle, and then loosening the fasteners on one side of the power steering pump and checking to ensure that there is enough space for it to move, and then the bolts on the side of the power steering pump Power steering system requires to be filled and bled.

Detach the fluid hoses from the pump, being prepared to catch any dripping fluid.