BMW 34416761293 Repair Kit Brake Shoe Asbestos-Free

You can Select Your Vehicle to check if 34416761293 fits your vehicle.

Replace parking brake hardware when replacing shoes by raising the car and supporting it safely, then removing the rear wheels. Without disconnecting the brake fluid hose, remove the rear brake calipers from the trailing arms and take off the rear brake rotors. Ensure the brake caliper assembly is not hanging from the brake hose; support it from the chassis with strong wire. At the parking brake handle, use a suitable prying tool to unclip the boot from the catches. Relieve parking brake cable tension by using a screwdriver to lock the parking brake handle adjuster by pressing the spring back to engage the lock. Working at the rear brake, unhook the return springs from the brake shoes, rotate the hub flange to align the lug hole with the return spring, and remove the brake shoe retaining pins using a 6 mm allen wrench by rotating the retainer 90° to release. Spread the shoes apart and lift them out, applying a thin coat of grease to sliding parts and pins before reassembly. Installation follows the reverse order of removal, including the installation of the rear brake rotor and adjustment of the parking brake cables.

Raise the rear of the car and remove the road wheels. Without disconnecting the brake fluid hose, remove the rear brake calipers from the trailing arms and take out the rear brake rotors. Ensure the brake caliper assembly does not hang from the brake hose; support it from the chassis with strong wire. Unhook the return springs from the brake shoes and remove the brake shoe retaining pins using a BMW special tool or an equivalent. Rotate the retainer a quarter turn to release it, then spread the shoes apart and lift them out, noting the position of the brake shoe adjuster, as the right side is illustrated and the left is a mirror image. Apply a thin coat of grease to the sliding parts and pins before reassembly, and ensure the installation is the reverse of removal while adjusting the parking brake cables.