BMW 51210034617 Set Uniform Locking System With Cas Control Unit (Code)

You can Select Your Vehicle to check if 51210034617 fits your vehicle.

To remove the inside door handle, begin by pulling off the inside door trim panel, undoing the interior handle lever, let go of the cable and take off the handle. When removing a front door latch assembly, you will have to remove a window regulator assembly; unplug wiring harnesses, release cables and release rods then loosen and remove the latch. The removal of front door exterior handle involves taking out lock cylinder (if necessary), rear cover and finally disengaging it from attachment. To take away the front door lock cylinder entails accessing then removing a single retaining bolt before pulling it out. In backdoor, start by removing inner trim panel and watershield, unplugging latch wiring, opening rod and opening cable in that order before removing latch assembly. To get rid of rear outer handle on a backdoor remove rear cover as well as pull it outwards while ensuring that latch lever is kept properly positioned. On installation however; you reverse these steps making sure components are properly sealed and secured; check functioning of the latch prior to closing door.

After removing the interior door trim panel, you need to release the interior handle lever.

Replace the door handle gaskets if they are damaged.

After disconnecting the wiring, release cable, and control rod, you should loosen and remove the latch assembly.