BMW 31352227241 Stabilizer, Front

You can Select Your Vehicle to check if 31352227241 fits your vehicle.

Raise and safely support the vehicle. Using a 6 point deep well socket, remove the locknuts from the outer link mounting brackets. On E36 models the locknuts are accessed from the top of the upper link arm. On E30 models, the locknuts are accessed from the lower trailing arm. Remove the through bolt and locknut from the inner sway bar kit bushing brackets. Pivot the sway bar kit brackets away from the mounting tab. If necessary, use a suitable prytool to help release the brackets, then lower the sway bar kit from the right side of the vehicle. To install, inspect and replace the sway bar kit bushings as necessary. Apply a suitable lubricant between the sway bar kit and the rubber bushings to prevent squeaking noises and allow smooth operation. Install the tongue of the inner sway bar kit bracket into the mounting tab, and pivot the bracket to install the bolt and locknut. If the bolt is not long enough to start, temporarily use a longer bolt to draw the bracket inward and seat it with the bushing, then install the correct through bolt and locknut. The balance of assembly is in reverse order of disassembly.

Install the stabilizer bar and bushings.