BMW 51227202147 Left System Latch

You can Select Your Vehicle to check if 51227202147 fits your vehicle.

To remove the inside door handle, begin by pulling off the inside door trim panel, undoing the interior handle lever, let go of the cable and take off the handle. When removing a front door latch assembly, you will have to remove a window regulator assembly; unplug wiring harnesses, release cables and release rods then loosen and remove the latch. The removal of front door exterior handle involves taking out lock cylinder (if necessary), rear cover and finally disengaging it from attachment. To take away the front door lock cylinder entails accessing then removing a single retaining bolt before pulling it out. In backdoor, start by removing inner trim panel and watershield, unplugging latch wiring, opening rod and opening cable in that order before removing latch assembly. To get rid of rear outer handle on a backdoor remove rear cover as well as pull it outwards while ensuring that latch lever is kept properly positioned. On installation however; you reverse these steps making sure components are properly sealed and secured; check functioning of the latch prior to closing door.

After releasing the interior handle lever, you should detach the cable.

It is important to avoid damaging the vapor barrier because a damaged vapor barrier should be replaced to prevent possible water leaks.

After removing the interior door trim panel, you need to release the interior handle lever.

Begin by removing the door handle and then the door panel.