BMW 33303402536 Upper Right Wishbone

You can Select Your Vehicle to check if 33303402536 fits your vehicle.

Raise the vehicle and remove the rear wheels. After removing the coil spring with the trailing arm still supported by a jack stand, proceed to remove the upper control arm bolt, noting the direction of bolt installation for reassembly. To detach the upper control arm, first remove the stabilizer bar link from the stabilizer bar, then take out the rod for the right height sensor on the passenger side only. Next, remove the nut on the reverse of the bolt and pull the bolt toward the rear of the vehicle. Extract the upper control arm from under the vehicle through the wheel well. For installation, reverse the removal process while ensuring to use previously made marks for the eccentric bolt and fit the eccentric washer. Utilize new self-locking nuts and tighten the fasteners to their final torque only after the vehicle has been lowered and the suspension has settled. It is advisable to have the vehicle professionally aligned upon completion of the job.

Remove the lower control arm mounting bolt at the trailing arm, noting the direction of bolt insertion, and then remove the lower control arm mounting bolt at the subframe by sliding the bolt out and removing the lock plate from the opposite end.

Raise the car and remove the wheel, then take off the underbody splash shield.