How to remove and install fuel injectors and Fuel Rail on BMW 328i?

To disconnect the negative battery cable, relieve fuel system pressure, and remove the engine cover, strut tower cross brace, and sound insulator. Remove ignition coils and high pressure fuel line. Disconnect the electrical connector to the high pressure sensor and loosen the high-pressure fuel pipe unions. Loosen fuel rail bolts and rotate the fuel rail to clear the injectors. Disconnect the electrical connectors from the injectors and remove the ground wire. Remove the hold-down elements and clean the area. Remove the injectors from the cylinder head and place plastic caps over each. Remove the coupling element from each injector and cut the Teflon ring. Clean the injector nozzle and install new Teflon rings if reusing the injectors. Program the adjustment values for new injectors. Install the injectors and tighten the coupling element bolts. Reconnect the high-pressure pipe unions. Tighten the injector clamp bolts and T-shaped coupling element mounting bolts. Reinstall the high-pressure fuel pump lines, ignition coils, and remaining components. For the 3.0L engine, remove the plastic cover, disconnect the fuel feed pipe, and remove the electrical connector strip. Remove the fuel rail and injectors as an assembly. Lubricate the fuel injector O-rings and install them to the fuel rail with the clips. Reverse the removal steps.

Genuine BMW 328i Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Injectors found

View related parts
BMW 328i Fuel Injector
Part Number: 13648625397
$286.97 MSRP: $361.31
You Save: $74.34 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rp Injector; Injector
- Replaces: 13-64-7-645-960, 13-64-7-629-174
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2016 BMW 328i | N20 Engine(F30), N26 Engine(F30), Sedan N20 Engine(F30), Sedan N26 Engine(F30), Wagon(F31)
View related parts
BMW 328i Fuel Injector
Part Number: 13647597870
$286.97 MSRP: $361.31
You Save: $74.34 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rp Injector; Injector
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2015 BMW 328i | N20 Engine(F30), Sedan N20 Engine(F30)
View related parts
BMW 328i Fuel Injector
Part Number: 13537574376
$173.65 MSRP: $216.78
You Save: $43.13 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injection Valve; Injector
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW 328i | Convertible N51 Engine(E93), Coupe N51 Engine(E92), Sedan N51 Engine(E90)
View related parts
BMW 328i Fuel Injector
Part Number: 13537531634
$173.65 MSRP: $216.78
You Save: $43.13 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injection Valve; Injector
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW 328i | Convertible N52 Engine(E93), Coupe N51 Engine(E92), Coupe N52 Engine(E92), Sedan N51 Engine(E90), Sedan N52 Engine(E90), Wagon(E91)
View related parts
BMW 328i Fuel Injector
Part Number: 13641703819
$172.29 MSRP: $235.90
You Save: $63.61 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injection Valve; Injector
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-1999 BMW 328i | Convertible(E36), Sedan(E36)
View related parts
BMW 328i Fuel Injector Continental
Part Number: 13537546244
$153.47 MSRP: $236.87
You Save: $83.40 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injection Valve; Injector
- Replaces: 13-64-1-427-240
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2000 BMW 328i | Sedan(E46)

BMW 328i Fuel Injector

Fuel Injector in BMW 328i cars is an essential part that works like an electric fuel carburetor that sprays fuel in the cylinders or intake manifold. A part of the engine control unit and working directly with it, a Fuel Injector regulates the air-fuel mix according to the current load the engine operates at. This is usually accompanied by poor idle, raw rough engine sound, less power or even sometimes lack of it, poor fuel economy may be accompanied by fouling of catalytic converters and oxygen sensors. To avoid such complications, it is recommended that fuel injectors that are faulty should be replaced as soon as possible. Fuel injection in BMW 328i is very important as it delivers fuel into the engine; it helps in increasing the efficiency and power of the engine through the regulation of the quantities of fuel injected and the time it is injected into the engine. It can be mechanical or electrical, the latest ones being controlled by an engine control unit. There are two main types of fuel injection used in BMW 328i vehicles: Direct injection entails the injection of fuel directly to the cylinder or combustion chamber while indirect injection dispenses fuel by a nozzle into the air intake system of the engine. In general, the Fuel Injector in BMW 328i vehicle replaces the older method of carburetor and adds to the better performances of automobiles.

If you are looking for OEM BMW 328i Fuel Injector, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 328i Fuel Injector that come backed by the manufacturer's warranty.

BMW 328i Fuel Injector Parts Questions & Experts Answers

Fuel Injector
13537531634
Q: How to remove and install fuel injectors and Fuel Rail on BMW 328i?
A: To disconnect the negative battery cable, relieve fuel system pressure, and remove the engine cover, strut tower cross brace, and sound insulator. Remove ignition coils and high pressure fuel line. Disconnect the electrical connector to the high pressure sensor and loosen the high-pressure fuel pipe unions. Loosen fuel rail bolts and rotate the fuel rail to clear the injectors. Disconnect the electrical connectors from the injectors and remove the ground wire. Remove the hold-down elements and clean the area. Remove the injectors from the cylinder head and place plastic caps over each. Remove the coupling element from each injector and cut the Teflon ring. Clean the injector nozzle and install new Teflon rings if reusing the injectors. Program the adjustment values for new injectors. Install the injectors and tighten the coupling element bolts. Reconnect the high-pressure pipe unions. Tighten the injector clamp bolts and T-shaped coupling element mounting bolts. Reinstall the high-pressure Fuel Pump lines, ignition coils, and remaining components. For the 3.0L engine, remove the plastic cover, disconnect the fuel feed pipe, and remove the electrical connector strip. Remove the fuel rail and injectors as an assembly. Lubricate the fuel injector O-rings and install them to the fuel rail with the clips. Reverse the removal steps.