BMW 72119116642 Rear Seat Belt Seatbelt Left Right Driver Passenger

You can Select Your Vehicle to check if 72119116642 fits your vehicle.

To remove the rear seat belt buckle, remove the rear seat cushion. Disconnect the electrical connector and loosen and remove the bolt and washer. Remove the buckle from the vehicle, noting the mounting bracket locating pin.

To remove the front seat belt buckle, remove the seat and release the tensioner wiring harness from the retaining clips. Slide the connector from the mounting bracket and release the clips/cable tie. Pry out the electrical connectors one at a time until the relevant plug is released. Loosen and remove the buckle-assembly retaining bolt and remove the assembly from the side of the seat, noting that the bolt must be replaced.

Seat belts are designed to lock up during a sudden stop or impact, while allowing free movement during normal driving.

Seat belts are designed to lock up during a sudden stop or impact, while allowing free movement during normal driving.

Seat belts are designed to lock up during a sudden stop or impact, while allowing free movement during normal driving.

The rear seat needs to be removed, followed by taking out the seat belt reel mounting bolt and the seat belt anchor bolt at the base of the backrest to lift out the seat belt.

Seat belts should be cleaned using a mild soap solution.

For rear center seat belt and buckle removal in sedan models, remove the rear seat and the retaining bolt. Remove the inertia reel unit and the seat belt lower mounting bolt.