Contact Us Live Chat or 1-888-580-1680
My Garage
My Account
Cart
Make sure this part fits

BMW 61667238669 Washer Fluid Reservoir

2006-2013 BMW 61-66-7-238-669

Customer Questions & Expert Answers (6)
BMW 61667238669 Washer Fluid Reservoir
  • Part Description
    Windshield Cleaning Container
  • Replaces
    61-66-7-124-232, 61-66-0-411-999
  • Manufacturer
    BMW
Make sure this part fits
$79.36 MSRP: $100.36
You Save: $21.00 (21%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine BMW
    Manufacturer Part Number61667238669
    Part DescriptionWindshield Cleaning Container
    Other NamesReservoir, Washer Reservoir
    Item Dimensions20.6 x 19.2 x 5.2 inches
    Item Weight3.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces61-66-7-124-232, 61-66-0-411-999
    ManufacturerBMW
    SKU61667238669
    WarrantyThis genuine BMW part is guaranteed by BMW's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Submodel
    2008-2013 BMW 128iConvertible N51 Engine(E88), Convertible N52 Engine(E88), Coupe N51 Engine(E82), Coupe N52 Engine(E82)
    2008-2013 BMW 135iConvertible N54 Engine(E88), Convertible N55 Engine(E88), Convertible(E88), Coupe N54 Engine(E82), Coupe N55 Engine(E82), Coupe(E82)
    2006-2011 BMW 323iSedan(E90)
    2006 BMW 325iSedan(E90)
    2006 BMW 325xiSedan(E90)
    2007-2011 BMW 328iSedan N51 Engine(E90), Sedan N52 Engine(E90)
    2009-2011 BMW 328i xDriveSedan N51 Engine(E90), Sedan N52 Engine(E90)
    2007-2008 BMW 328xiSedan N51 Engine(E90), Sedan N52 Engine(E90)
    2006 BMW 330iSedan(E90)
    2006 BMW 330xiSedan(E90)
    View More
  • Customer Questions & Expert Answers

    Q:
    Should I get this part or another part for my car? Posted by BMWPartsDeal Specialist
    A:
    You can Select Your Vehicle to check if 61667238669 fits your vehicle.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install Washer Pump and Washer Reservoir on BMW 325i? Posted by Customer
    A:
    The reservoir of the washer is located behind the right front wheel well. To remove it, remove the inner fender liner. Then unclip the wiring harness and hose from the reservoir clips, disconnecting the filler hose as well. Maneuver away from fenderwell by removing bolt and disconnect electrical connectors and hoses from reservoir components. Reinstall in reverse order of removal ensuring that locating lugs on rear edge of reservoir engage properly with corresponding slots in inner fender. Fill the reservoir and inspect for leakage. They can be removed following the same guidelines used earlier to remove a windshield washer pump assembly, but only if you are mechanically inclined to do so can you proceed as they are disassembled in such a way that they cannot be reassembled correctly. Disconnect electric wiring connector(s) or hose(s) connected on washer pump(s), then rotate carefully clockwise after which raise them up out of container (reservoir). After proper inspection, replace damaged or worn-out pump sealing grommet(s). Install As mentioned above except use new sealant grommet when required.One may also follow the steps given above to withdraw washer bottle level switch. Rotate level switch counterclockwise; pull off from container (reservoir). Install As per removal procedure while using another sealant grommet when necessary.Refill and check for leaks.The windscreen cleaner nozzle can be taken out by removing cabin air filter cover followed by removing hoses and electrical connections.Press back on spray nozzle until it pops up at front edge then lift forward to release it from panel.Re-assemble the item opposite to what was done during detachment.The headlamp cleaning system nozzle will require prying out of this area below headlamp whereafter one can now remove cover from nozzle after separating it.Remove front bumper then detach heating element electrical connector.Apart from detaching mounting clip first then remove thread pipe section.Install similar manner like in removal process.The rear window washer nozzle can be taken out by removing high-mount brake light, releasing the clip, disconnecting the hose, and pulling it from high mount brake light.The reverse of the removal process will include aiming the nozzle at specified location on window.Run by central control module assembly located within main fusebox.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install Washer Pump and Washer Reservoir on BMW 328i? Posted by Customer
    A:
    The reservoir of the washer is located behind the right front wheel well. To remove it, remove the inner fender liner. Then unclip the wiring harness and hose from the reservoir clips, disconnecting the filler hose as well. Maneuver away from fenderwell by removing bolt and disconnect electrical connectors and hoses from reservoir components. Reinstall in reverse order of removal ensuring that locating lugs on rear edge of reservoir engage properly with corresponding slots in inner fender. Fill the reservoir and inspect for leakage. They can be removed following the same guidelines used earlier to remove a windshield washer pump assembly, but only if you are mechanically inclined to do so can you proceed as they are disassembled in such a way that they cannot be reassembled correctly. Disconnect electric wiring connector(s) or hose(s) connected on washer pump(s), then rotate carefully clockwise after which raise them up out of container (reservoir). After proper inspection, replace damaged or worn-out pump sealing grommet(s). Install As mentioned above except use new sealant grommet when required.One may also follow the steps given above to withdraw washer bottle level switch. Rotate level switch counterclockwise; pull off from container (reservoir). Install As per removal procedure while using another sealant grommet when necessary.Refill and check for leaks.The windscreen cleaner nozzle can be taken out by removing cabin air filter cover followed by removing hoses and electrical connections.Press back on spray nozzle until it pops up at front edge then lift forward to release it from panel.Re-assemble the item opposite to what was done during detachment.The headlamp cleaning system nozzle will require prying out of this area below headlamp whereafter one can now remove cover from nozzle after separating it.Remove front bumper then detach heating element electrical connector.Apart from detaching mounting clip first then remove thread pipe section.Install similar manner like in removal process.The rear window washer nozzle can be taken out by removing high-mount brake light, releasing the clip, disconnecting the hose, and pulling it from high mount brake light.The reverse of the removal process will include aiming the nozzle at specified location on window.Run by central control module assembly located within main fusebox.
    Posted by BMWPartsDeal Specialist
    Q:
    How do you service the washer fluid reservoir on BMW 335i? Posted by Customer
    A:
    Remove the washer fluid reservoir by detaching the electrical connector from the washer fluid level switch, rotating the switch clockwise, and prying it out of the reservoir while being prepared to catch any dripping fluid. For the rear window washer pump, detach the electrical connector, cut or loosen the hose clamp, and detach the hose from the pump before rotating the pump clockwise and prying it out of the reservoir, again being ready to catch any fluid. For the windshield washer pump, detach the electrical connector, cut or loosen the hose clamp, and detach the hose from the pump, then rotate the pump clockwise and pry it out of the reservoir while catching any fluid. For the headlight washer pump, detach the electrical connector, separate the high-pressure fluid hose at the split connector, rotate the pump clockwise, and pry it out of the reservoir, prepared for any dripping fluid. Installation follows the reverse order of removal, ensuring to replace strainers on the washer pumps, coat the grommet at the base of the pump or sensor with an anti-friction agent, and use new hose clamps if necessary. After installation, check that fluid hoses are not kinked, fill the reservoir, and check for leaks.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install Washer Pump and Washer Reservoir on BMW 330i? Posted by Customer
    A:
    The reservoir of the washer is located behind the right front wheel well. To remove it, remove the inner fender liner. Then unclip the wiring harness and hose from the reservoir clips, disconnecting the filler hose as well. Maneuver away from fenderwell by removing bolt and disconnect electrical connectors and hoses from reservoir components. Reinstall in reverse order of removal ensuring that locating lugs on rear edge of reservoir engage properly with corresponding slots in inner fender. Fill the reservoir and inspect for leakage. They can be removed following the same guidelines used earlier to remove a windshield washer pump assembly, but only if you are mechanically inclined to do so can you proceed as they are disassembled in such a way that they cannot be reassembled correctly. Disconnect electric wiring connector(s) or hose(s) connected on washer pump(s), then rotate carefully clockwise after which raise them up out of container (reservoir). After proper inspection, replace damaged or worn-out pump sealing grommet(s). Install As mentioned above except use new sealant grommet when required.One may also follow the steps given above to withdraw washer bottle level switch. Rotate level switch counterclockwise; pull off from container (reservoir). Install As per removal procedure while using another sealant grommet when necessary.Refill and check for leaks.The windscreen cleaner nozzle can be taken out by removing cabin air filter cover followed by removing hoses and electrical connections.Press back on spray nozzle until it pops up at front edge then lift forward to release it from panel.Re-assemble the item opposite to what was done during detachment.The headlamp cleaning system nozzle will require prying out of this area below headlamp whereafter one can now remove cover from nozzle after separating it.Remove front bumper then detach heating element electrical connector.Apart from detaching mounting clip first then remove thread pipe section.Install similar manner like in removal process.The rear window washer nozzle can be taken out by removing high-mount brake light, releasing the clip, disconnecting the hose, and pulling it from high mount brake light.The reverse of the removal process will include aiming the nozzle at specified location on window.Run by central control module assembly located within main fusebox.
    Posted by BMWPartsDeal Specialist
    Q:
    What should you do after opening the engine hood for the 2007 BMW 335i? Posted by Customer
    A:
    Raise the front of the vehicle and support it safely, then remove the right front wheel and the right front wheel housing trim.
    Posted by BMWPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine BMW Part 61667238669, the Right Choice

To ensure reliability, purchase BMW part # 61667238669 Washer Fluid Reservoir. It is sometimes referred to as BMW Washer Reservoir. Genuine parts are first-rate in terms of quality and functionality. Manufactured directly by BMW, they undergo rigorous testing and are made from dependable materials to ensure long-lasting durability and dependability. This part fits 2006 BMW 325i, 2007-2011 BMW 328i, 2009-2011 BMW 328i xDrive, 2007-2011 BMW 335i.

BMWPartsDeal.com is a leading supplier of genuine BMW parts and accessories such as BMW 61-66-7-238-669 Washer Fluid Reservoir. In need of brand new OEM BMW parts? Feel free to browse through our extensive catalog of genuine BMW parts, all priced at the most competitive rates in the market. Furthermore, every part comes with a manufacturer's warranty and a hassle-free return policy for your convenience.

Why choose BMW Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly