How to remove and install the Thermostat?

Remove the fasteners and the engine splash shield. Drain the cooling system. Release the clamps/pry out the clips and disconnect the four coolant hoses from the thermostat housing, which is located above the coolant pump at the front right-hand corner of the cylinder block. Disconnect the electrical connector from the base of the thermostat housing. Remove the mounting bolts and the thermostat housing. Note: The thermostat and housing are only available as a complete unit. Installation is the reverse of removal, bearing in mind the following points. Replace the thermostat cover/housing O-ring seal. Tighten the thermostat cover/housing bolts to the specified torque where given. Refill the cooling system.

Genuine BMW 328i Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Thermostats found

View related parts
BMW 328i Thermostat
Part Number: 11538635689
$116.81 MSRP: $168.10
You Save: $51.29 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Thermostat Housing, Thermostat Unit
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2016 BMW 328i | N20 Engine(F30), N26 Engine(F30), Sedan N20 Engine(F30), Sedan N26 Engine(F30), Wagon(F31)
View related parts
BMW 328i Thermostat
Part Number: 11537549476
$126.33 MSRP: $184.90
You Save: $58.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat Housing, Thermostat Unit
- Replaces: 11-53-7-544-788, 11-53-7-536-655
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW 328i | Convertible N51 Engine(E93), Convertible N52 Engine(E93), Coupe N51 Engine(E92), Coupe N52 Engine(E92), Sedan N51 Engine(E90), Sedan N52 Engine(E90), Wagon(E91)
View related parts
BMW 328i Thermostat Housing Sensor
Part Number: 11537509227
$102.78 MSRP: $147.91
You Save: $45.13 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat Housing With Thermostat
- Replaces: 11-53-0-139-877
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2000 BMW 328i | Sedan(E46)
View related parts
BMW 328i Behr Thermot-Tronik Thermostat
Part Number: 11537511580
$38.15 MSRP: $46.06
You Save: $7.91 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat
- Replaces: 11-53-1-721-002
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-1999 BMW 328i | Convertible(E36), Sedan(E36)
View related parts
BMW 328i Oil Cooler Thermostat
Part Number: 17111437362
$89.04 MSRP: $112.61
You Save: $23.57 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat; Temperature Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2000 BMW 328i | Sedan(E46)
View related parts
BMW 328i Thermostat
Part Number: 11537511083
$68.37 MSRP: $82.54
You Save: $14.17 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat Housing
- Replaces: 11-53-1-733-803, 11-53-1-712-043, 11-53-1-468-057
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-1999 BMW 328i | Convertible(E36), Sedan(E36)

BMW 328i Thermostat

thermostat in the BMW 328i car is as important component of the car engine cooling system which assist in controlling the temperature of the engine to ensure it runs efficiently. Sitting close to the radiator, thermostat is utilized to clamp open when the water inside the cooling system touches a specific temperature enabling water to flow in the required manner. If thermostat does not open as it should be, the engine tends to overheat and therefore can be considerably damaged. BMW 328i Thermostats are mainly of standard mechanical designs including bimetal which is strips or the wax pellet mechanisms to regulate the engine temperature correctly. These thermostats have undergone changes over the years, which has seen better control of temperature in automotive systems because of enhancement in technology.

If you are looking for OEM BMW 328i Thermostat, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 328i Thermostat that come backed by the manufacturer's warranty.

BMW 328i Thermostat Parts Questions & Experts Answers

Thermostat
11-53-7-549-476
Q: How to remove and install the Thermostat?
A: Remove the fasteners and the engine splash shield. Drain the cooling system. Release the clamps/pry out the clips and disconnect the four coolant hoses from the thermostat housing, which is located above the coolant pump at the front right-hand corner of the cylinder block. Disconnect the electrical connector from the base of the thermostat housing. Remove the mounting bolts and the thermostat housing. Note: The thermostat and housing are only available as a complete unit. Installation is the reverse of removal, bearing in mind the following points. Replace the thermostat cover/housing O-ring seal. Tighten the thermostat cover/housing bolts to the specified torque where given. Refill the cooling system.