×
- Live Chat
- 1-888-580-1680
My Garage
My Account
Cart
Genuine BMW Z3 Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orSeries
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Intake Manifolds found
BMW Z3 Intake Manifold
Part Number: 11617525752$660.79 MSRP: $864.59You Save: $203.80 (24%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold
Part Number: 11411727936$35.53 MSRP: $47.82You Save: $12.29 (26%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold System
Part Number: 11611439965$703.14 MSRP: $920.00You Save: $216.86 (24%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold
Part Number: 11617525753$703.14 MSRP: $920.00You Save: $216.86 (24%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold
Part Number: 11611707027$639.13 MSRP: $823.78You Save: $184.65 (23%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold Lower Part
Part Number: 11611247263$207.29 MSRP: $262.64You Save: $55.35 (22%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold Upper Part
Part Number: 11611247266$308.32 MSRP: $393.99You Save: $85.67 (22%)Ships in 1-3 Business Days
BMW Z3 Intake Manifold
Intake Manifold as its name depicts in the BMW Z3 is responsible of distribution of air or air/fuel mixture in the cylinder of the car engine for better power and performance. Often times it is constructed from a light weight plastic and helps in uniform distribution as well as combustion. Depending on the configuration of the Z3 model, some have a two-piece upper and lower half, held in place by gaskets. Also, coolant passages and sensor mounts mostly incorporate into the manifold to enhance the regulation of the engine. There is a common tendency to turn to an OEM performance manifold and it can easily add up to 10hp (Horse Power) and 12 NM Torque when combined with engine alterations. The Intake Manifold of BMW Z3 automobiles moves air and fuel evenly into the cylinder and works as a chamber for the mixing of these two components.
If you are looking for OEM BMW Z3 Intake Manifold, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW Z3 Intake Manifold that come backed by the manufacturer's warranty.
BMW Z3 Intake Manifold Parts Questions & Experts Answers
- Q: How to disconnect, remove, and install the intake manifold on BMW Z3?A: Disconnect the negative battery cable on E30 models with the S14 engine, remove cap nuts at the outer ends of the 4 throttle necks, then the mounting nuts underneath. After ensuring the engine has cooled off, loosen the hose clamps for the air intake lines and the fuel lines, collect fuel in a metal container. Disconnect the throttle cable, intake manifold, cut off the crankcase ventilation hose, and replace it. Remove the throttle valve switch plug, injector plug plate, fuel pressure regulator vacuum hose, injector pipe, throttle necks, and separate the assemblies. Inspect the O-rings in the connecting pipe, and reverse the removal procedure to install. Use a new throttle linkage self-locking nut and a new crankcase ventilation hose. Torque the attaching nuts to the specified limits and adjust the throttle cable. For the M20 engine, disconnect the battery ground cable, drain the cooling system, remove the air flow sensor, vacuum hoses, and electrical plugs. Remove the intake manifold, install it on new gaskets, reconnect all lines and electrical connections, fill the cooling system with coolant, and connect the negative battery terminal. For the M42 engine, follow the outlined procedure for disconnection, removal, and installation. Ensure to replace gaskets, inspect O-rings, and check for fluid or vacuum leaks after installation. For E36 models with 4-cylinder engines, ensure to label all cables, electrical connectors, fuel, coolant, and breather hoses. Relieve the fuel system pressure, disconnect the negative battery cable, drain the coolant, remove the upper air filter housing, mass air flow sensor, intake duct, accelerator cables, electrical connectors, hoses, and intake manifold. Cover the open intake ports, reinstall in reverse order, and replace all intake manifold gaskets. For 6-cylinder engines, relieve the fuel system pressure, disconnect the negative battery cable, drain the coolant, remove the throttle cable cover, vacuum fitting, manifold covers, ignition coil wire harness, cylinder head vent hose, air temperature sensor plug, coolant hoses, throttle valve switch connector, and intake manifold. Install the manifold onto the engine, tighten the bolts, and check for fluid leaks after installation.
