×
- Live Chat
- 1-888-580-1680
My Garage
My Account
Cart
Genuine BMW 330i Wheel Bearing
Hub Bearing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orSeries
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Wheel Bearings found
BMW 330i Set, Wheel Bearing
Part Number: 31202408656$280.07 MSRP: $399.65You Save: $119.58 (30%)Ships in 1-3 Business Days
BMW 330i Wheel Hub With Bearing, Front
Part Number: 31216765157$245.03 MSRP: $361.71You Save: $116.68 (33%)Ships in 1-3 Business Days
BMW 330i Wheel Hub With Bearing, Front
Part Number: 31206876840$257.92 MSRP: $380.72You Save: $122.80 (33%)Ships in 1-2 Business Days
BMW 330i Angular Contact Ball Bearing,Radial
Part Number: 33411090505$91.19 MSRP: $126.87You Save: $35.68 (29%)Ships in 1-3 Business Days
BMW 330i WHEEL HUB WITH BEARING
Part Number: 31206899176$270.81 MSRP: $399.76You Save: $128.95 (33%)Ships in 1-3 Business Days
BMW 330i Service Kit, Wheel Bearing, Rear
Part Number: 33412295519$92.10 MSRP: $124.00You Save: $31.90 (26%)Ships in 1-3 Business Days
BMW 330i Angular Contact Ball Bearing,Radial
Part Number: 33416775842$96.25 MSRP: $133.90You Save: $37.65 (29%)Ships in 1-3 Business DaysBMW 330i Wheel Hub With Bearing, Front
Part Number: 31206867256$257.92 MSRP: $380.72You Save: $122.80 (33%)Ships in 1-3 Business DaysBMW 330i Angular Contact Ball Bearing,Radial
Part Number: 33416792361$101.34 MSRP: $140.98You Save: $39.64 (29%)Ships in 1-3 Business Days
BMW 330i Drive Flange Hub
Part Number: 33416867262$107.66 MSRP: $149.78You Save: $42.12 (29%)Ships in 1-3 Business Days
BMW 330i Wheel Bearing
The Wheel Bearing of BMW 330i is an assembly of componeants that make the wheels rotate independently of the vehicle for efficiency and safety. It is evident that there are three arrangements of the hub and bearing assemblies and the most frequently used one is the unit assembly, the ABS sensor. The state of bearings is either loose or worn resulting in noise and vibration which might result in wheel loss. This can only be done through periodic examinations and when this is done, some of the aspects to look for include; roughness, play and signs of wear. Taper roller bearing are insert type and hence these have to be thoroughly cleaned and then reinstalled with good quality grease. In total, the Wheel Bearing has a significant function of providing a comfortable and safe ride to the BMW 330i vehicles.
If you are looking for OEM BMW 330i Wheel Bearing, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 330i Wheel Bearing that come backed by the manufacturer's warranty.
BMW 330i Wheel Bearing Parts Questions & Experts Answers
- Q: How to remove and install the rear hub bearing?A: Remove the rear hub. Remove the hub bearing retaining snap ring from the Trailing Arm. Tap the hub bearing out from the hub carrier using a hammer and suitable punch. Thoroughly clean the hub carrier bore, removing all traces of dirt and grease, and polish away any burrs or raised edges which might hinder reassembly. Replace the snap-ring if there is any doubt about its condition. On reassembly, apply a light film of clean engine oil to the bearing outer race to aid installation. Place the bearing in the hub carrier and tap it fully into position, ensuring that it enters the carrier squarely, using a suitable tubular spacer which bears only on the bearing outer race. Secure the bearing in position with the snap-ring, making sure it is correctly positioned in the hub carrier groove. Install the rear hub.
