How to access the oil pressure warning switch for the MS4 engine and remove the oil pressure switch for the N52 engine?

For the MS4 engine, access to the oil pressure switch is restricted. For the N52 engine, if necessary, remove the ignition coil cover. Loosen the oil filter cap to allow engine oil to drain back down into the oil pan. Disconnect the harness connector from the oil pressure switch and remove the switch. Be prepared to catch leaking oil with a shop towel. Caution should be taken to thoroughly clean around the oil pressure switch before removing it. Installation is the reverse of removal. Tighten the oil filter housing cap and top off oil, if necessary.

Genuine BMW X3 Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oil Pressure Switches found

View related parts
BMW X3 Oil Pressure Switch
Part Number: 12618611273
$22.06 MSRP: $31.22
You Save: $9.16 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaces: 12-61-1-710-509, 12-61-7-568-480, 12-61-7-620-512, 12-61-2-367-061, 12-61-1-730-160
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2015-2017 BMW X3 | xDrive28d(F25)
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Oil Pressure Sensor
Part Number: 12617592532
$42.12 MSRP: $59.62
You Save: $17.50 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2017 BMW X3 | xDrive28i(F25), xDrive35i(F25)
View related parts
BMW X3 Engine Oil Pressure/Temperature Sensor
Part Number: 12618613333
$56.15 MSRP: $79.48
You Save: $23.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 12-61-7-595-724
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2013-2017 BMW X3 | sDrive28i(F25), xDrive28i(F25)
View related parts
BMW X3 Oil Pressure Sensor
Part Number: 12618647488
$42.12 MSRP: $59.62
You Save: $17.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pressure Sending Unit
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2023 BMW X3 | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), M40i(G01), sDrive30i(G01), xDrive30e(G01), xDrive30i(G01)
View related parts
BMW X3 Oil Pressure Switch
Part Number: 12612367061
$22.06 MSRP: $31.22
You Save: $9.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 12618611273
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Oil Pressure Switch
Part Number: 12611710509
$22.06 MSRP: $31.22
You Save: $9.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 12618611273
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Oil Pressure Switch
Part Number: 12617568480
$22.06 MSRP: $31.22
You Save: $9.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 12618611273
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Oil Pressure Switch
Part Number: 12617620512
$22.06 MSRP: $31.22
You Save: $9.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 12618611273
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Oil Pressure Sensor
Part Number: 12617549796
$42.12 MSRP: $59.62
You Save: $17.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pressure Sending Unit, Oil Pressure Switch
- Replaced by: 12615B4C892
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2010 BMW X3 | 3.0si(E83)

BMW X3 Oil Pressure Switch

Oil Pressure Switch is important component that located in BMW X3 vehicles which helps in detecting the oil pressure level of the vehicle for the better performance and longevity of the vehicle engine. This component is intended to warn drivers in case there is a failure in oil pressure to operate optimally and prevent harm on the working engine. Various models of X3 might have required different types of Oil Pressure Switches; thus, it is possible that The oil pressure switch operates in different ways to detect changes in oil pressure and to signal them. Thus, due to the timely identification and regulation of changes in oil pressure, the Oil Pressure Switch ensures the functioning and reliability of BMW X3 automobile engines.

If you are looking for OEM BMW X3 Oil Pressure Switch, we highly recommend to shop with us. Not only do we offer the most budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X3 Oil Pressure Switch that come backed by the manufacturer's warranty.

BMW X3 Oil Pressure Switch Parts Questions & Experts Answers

Oil Levelling Sensor
12-61-7-508-003
Q: How to access the oil pressure warning switch for the MS4 engine and remove the oil pressure switch for the N52 engine?
A: For the MS4 engine, access to the oil pressure switch is restricted. For the N52 engine, if necessary, remove the ignition coil cover. Loosen the oil filter cap to allow engine oil to drain back down into the Oil Pan. Disconnect the harness connector from the oil pressure switch and remove the switch. Be prepared to catch leaking oil with a shop towel. Caution should be taken to thoroughly clean around the oil pressure switch before removing it. Installation is the reverse of removal. Tighten the oil filter housing cap and top off oil, if necessary.